The horizontal chisel mortising machines are been studied and equipped with a series of very functional devices allowing of satisfying the requirements of both small and middle industry and handcraft. The machines can make mortises of various lenghts and depths on window, balcony and door posts. The machine structure includes a thick steel basement with remaining parts in cast-iron. The table transversal movement is controlled by a pneumatic piston with adjustable speed which slides on ground round bars protected by scrapers.

 MBO - T1

• Horizontal chisel mortiser mod. MBO-T1  

• On the table longitudinal movement, which is controlled by a handwheel, a revolving device with mechanical stops is fitted.

• Four wood clamping pneumatic cylinders.

• Automatic table locking device during operation.

• Chips exhaust fitting.

• The electricals are protected by thermal relays and fuses.

• The pneumatic safety system prevents any starting of the machine if the woodpiece is not clamped

• The machine is equipped with additional aluminum guides with balance stops

MBO - T3

• The machine makes mortises on windows, balconies and doors of different lengths which can be preselected by means of cams as well as of different depths.

• The machine movements are made with one manipulator.

• The transversal movement is made by airdraulic cylinder.

• Lubrication by centralized hand pump

• Four wood clamping pneumatic cylinders.

• Automatic table lock during operation.

• Chips exhaust fitting.

• The pneumatic safety system prevents any starting of the machine if the woodpiece is not clamped

• The machine is equipped with additional aluminum guides with balance stops

 MBO - T9

• With the MBO - T9 chisel mortising machine we have made a highly reliable electronic machine at a limited cost.

• It's equipped with a programmer with a backlit LC-display allowing immediate reading of enter data.

• X-axis (longitudinal) transmission is made by trapezoidal screw driven by a speed variator plus a selfbraking motor.

• The positioning is controlled by a revolving transducer (encoder).

• The transversal movement is made by airdraulic cylinder with adjustable speed and slides on round ground guides protected by scrapers.

• Three wood clamping hydraulic cylinders.

• Lubrication by centralized hand pump.

• The machine is equipped with additional aluminum guides with balance stops

 MBO - T10

• Machine with one controlled axis.

• The programmer manages the movements of the work table (X-axis stroke: 930 mm.) to control the length of the mortises and the distance between them.

• Programming is piloted: up to 98 work programmes can be stored.

• A system of adjustable cams acting on a microswitch the various mortising depths.

• Manual device for adjusting the chisel height with mechanical read-out.

 MBO - T11

• Machine with two controlled axes.

• The programmer manages the movements of the work table (X-axis stroke: 930 mm.) to control the length of the mortises and the distance between them, and the Y-axis to control the mortising depth.

• Programming is piloted: up to 98 work programmes can be stored.

• Manual device for adjusting the chisel height with mechanical read-out.

 MBO - T11/3

• Machine with three controlled axes.

• The programmer manages the movements of the work table (X-axis stroke: 930 mm.) to control the length of the mortises and the distance between them, the Y-axis to control the mortising depth and the Z-axis to control the chisel height.

• Programming is piloted: up to 98 work programmes can be stored.

• On all 3 models, MBO-T10/MBO-T11 and MBO-T11/3, it is possible to programme right and left  door and window posts, to control the chips removal  as well as the automatic subdivision function (English style windows)

 MBO-T20

• The programmer manages the longitudinal movements of the work table (X-axis stroke mm.930) for controlling the length of the mortises and the distance between them.

• The transversal movements (Y-axis) for managing the depth of the mortises.

• The vertical adjustment of the operating head takes place manual through a handwheel with mechanical read-out.

• The big novelty with this machine, considering its dimensions, is that by means of a pneumatic jaw added to the work table longitudinal stroke, it is possible to manage automatically by CN, the working shift along the whole length of the workpiece, without need of retaking the workpiece manually.

• Its programming is extremely simple and it is possible to visualize 10 programming steps at the same time.

• It manages RIGHT and LEFT window posts, chips removal as well as the function of automatic repartition of the post (English style windows)